FEEDERS

Econo
Each of our dosing units can be used in volumetric as well as gravimetric operation.
Econo

LOSS-IN-WEIGHT FEEDER FOR GRANULAT


Our Loss-in-weight feeders are suitable for pellets, fibres, grinded materials, micro-pellets or polymer-powders. Our volumetric feeders Mono, Logo, Solo und Golo can be converted into our gravimetric feeders Econo, Ratio and Golia by linking the feeder to a platform scale. The output of the feeder is determined by the choice of the gear, discharge pipe and screw.

Econo

ECONO

Single-screw feeder without agitator

  • Material: 1.4301
  • Weight: around 22kg
  • Basic hopper: 28dm³
  • Hopper sizes: 36,64,98,130,210dm³
  • Drive: 230/400 VAC 50 Hz geared motor
  • Output-rates: around 0,3 to 3000 kg/h
  • Scale: Basic300 or Basic400

RATIO

Single-screw feeder without agitator

  • Material: 1.4301
  • Hopper sizes: 36,98,130,210dm³
  • Drive: 230/400 VAC 50 Hz geared motor
  • Output-rates: around 100 to 10.000 kg/h
  • Scale: Basic400
Ratio
Golia

GOLIA

Two-screws feeder without agitator

  • Material: 1.4301
  • Weight: around 70kg
  • Basic hopper: 56dm³
  • Hopper sizes: 125, 175 dm³
  • Drive: 230/400 VAC 50 Hz geared motor
  • Output-rates: around 10 to 30.000 kg/h
  • Scale: Basic600

LOSS-IN-WEIGHT FEEDER FOR POWDER

Our Loss-in-weight feeders are suitable for non free flowing powders, pellets, premixes, fibres, grinded materials and micro-pellets. Our volumetric feeders HF31, HF51/52, HF71/72 and HF81/82 can be converted into our gravimetric feeders Smart, Vario, Solid and Titan by linking the feeder to a platform scale.

Smart

SMART

Single-screw feeder with flexible hopper

  • Material: Stainless steel, powder coated/ PUR hopper
  • Dimension (LxWxH): 250mm x 215mm x 245mm
  • Basic-Hopper: 7dm³/ H: 240mm
  • Drive: 230/400 VAC 50 Hz geared motor
  • FU LENZE Vektor: 3 to 100 Hz
  • Output-rates: around 0,03 to 30dm³/h
  • Scale: Basic300

VARIO

Single-screw feeder with flexible hopper

  • Material: Stainless steel, powder coated/ PUR hopper
  • Dimension (LxWxH): 400mm x 400mm x 320mm
  • Weight: around 34kg
  • Hopper sizes:
     Basic-Hopper 36dm³/ H: 400mm
     Basic-Hopper 54dm³ / H: 600mm
     Stack-Hopper 36 dm³/ H: 400mm (stackable)
  • Drive: 230/400 VAC 50 Hz geared motor
  • FU LENZE Vektor: 3 to 100 Hz
  • Output-rates: around 0,8 to 450 dm³/h
  • Scale: Basic400
Vario
Solid

SOLID

Single screw feeder with flexible hopper

  • Material: Stainless steel, powder coated
  • Dimension (LxWxH): 600mm x 600mm x 420mm
  • Weight: ca. 73 kg
  • Hopper sizes:
     Basic-Hopper 125dm³/ H: 500mm
     Basic-Hopper 175dm³/ H: 700mm
     Stack-Hopper 150dm³/ H: 600mm (stackable)
  • Drive: 230/400 VAC 50 Hz geared motor
  • FU LENZE Vektor: 3 to 100 Hz
  • Output-rates: around 15 to 2500 dm³/h
  • Scale: Basic600

TITAN

Single screw feeder with flexible hopper

  • Material: Stainless steel, powder coated
  • Dimension (LxWxH): 800mm x 800mm x 640mm
  • Weight: ca. 160 kg
  • Hopper sizes:
     Basic-Hopper 365 dm³
     Stack-Hopper 392 dm³ (stackable)
  • Drive: 230/400 VAC 50 Hz geared motor
  • FU LENZE Vektor: 3 to 100 Hz
  • Output-rates: around 150 to 30000 dm³/h
  • Scale: Basic800
Titan

LOSS-IN-WEIGHT FEEDER FOR FLUIDS


Our Loss-in-weight feeders are suitable for fluids, for example oils,softener, silanes, water, waxes, silicones and glycerines. The feeders are designed for outputs of 0,1 - 1000kg/h, viscosity of 0 - 100000mPas, pressure up to 200bar and heat up to 160°C. The feeders are available as mobile units. Depending of the use, a diaphragm, gear, hose or piston pump is used.


regelung

dosiergeräte




WEIGH-BELT FEEDER


Our weigh-belt feeder is suitable for bad flowing or light bulk solids. The feeder is characterised by an open concept, customary belt conveyors as well as the use of the entire belt length for weighing.